HBMX120i Machine Specifications
| |
|---|
Travels & CapacityX, Y, Z, W Axis Travel | 118.1 x 70.1 x 66.9 x 19.7 in (3,000 x 1,780 x 1,699 x 500 mm) |
| Table Working Surface | 56.7 x 63 in (1,440 x 1,600 mm) |
| Max. Weight on Table | 13,889 lbs. (6,299 kg) |
| Table T-Slots | 9 x .9 in (228 x 22 mm) |
| Spindle Nose to Table Center | 5.1 to 89.8 in (129 to 2,280 mm) |
| Floor to Table Surface | 42.1 in (1,070 mm) |
SpindleSpindle Speed | 8-454 (low), 8-2,500 (high) rpm (8-454 rpm (low), 8-2,500 rpm (high)) |
| Spindle Motor Power (10 min.) | 40.2 HP (30 kW) |
| Spindle Motor Torque (1 min.) | 1,106.3 ft lbs. (low) ,303.9 (high) ft lbs (1,500 (low), 412 Nm (high)) |
Feedrates / MotionRapid Traverse Rate X/Y/Z Axes (ipm) | 393.7 in/min (10 m/min) |
| Rapid Traverse Rate W-Axis | 157.5 in/min (4.0 m/min) |
| Max Programmable Feedrate | 393.7 in/min (10 m/min) |
| Least Command Increment | .0001 in (0.002mm) |
| Positioning Accuracy (10 pass VDI 3441 Method) | .001 in (0.025mm) |
| Repeatability (10 pass VDI 3441 Method) | .0006 in (0.015mm) |
| Positioning Accuracy B | +/- 9 arc seconds (+/- 18 arc seconds) |
| Repeatability B | +/- 6 arc seconds (+/- 12 arc seconds) |
Tool ChangerSpindle Taper | CAT 50 |
| Number Of Tools | 60 (90 optional) |
| Tool Changer Type | Electronic |
| Maximum Tool Weight | 55.1 lbs. (25 kg) |
| Maximum Tool Diameter | 4.7 in (120 mm) |
| Maximum Tool Length | 15.7 in (400 mm) |
GeneralCoolant Capacity | 132.1 gallons (500 liters) |
| |
| |
